Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13759668
- Product Categories
- Friendly Links
Information Name: | Professional road hot melt marking parking spaces crossed |
Published: | 2015-06-13 |
Validity: | 99999999 |
Specifications: | |
Quantity: | 0.00 |
Price Description: | |
Detailed Product Description: | Crossed the road is divided into: hot melt marking, scribing cold paint, hot melt oscillation crossed. Hot melt marking of road reticle is most widely used as a scribing process. Advantages construction time is short, high abrasion resistance and low cost. Crossed the road pavement, withstand sun and rain, snow ice, wear a hit vehicle, thus its performance, there are strict requirements. First requires drying time is short, simple operation, in order to reduce traffic disturbances; second, require highly reflective ability, bright, reflective of the strong, so that during the day, have a good visibility at night; and third, should have skid resistance and abrasion resistance, in order to ensure traffic safety and service life. Crossed the road, road marking, the factory crossed the road, the factory parking lot, underground garage crossed, school crossed the road, living quarters and other construction projects crossed, crossed into two crossed cold and hot melt paint. Use Special road for cold paint, artificial spray, thickness, color and clarity. Parking included, Jinting yellow line area, the channel line, the diversion with the guide arrows. Hot melt marking construction process: 1, reflective hot melt marking, paint glass beads, petroleum resin hot melt coating. 2, the paint on the inside hot melt machine heated, melted temperature control between 180 degrees to 220 degrees Celsius, and stir for about 10 minutes after coating. 3, mark the position and measure, according to the position and graphic design icon Ming, and then figure mark applied primer paint. 4, can be carried out after the primer dry hot melt coating, marking coated reflective glass beads while spreading, increase visibility even at night, marking the thickness of 1.5- 1.8MM. Contact: Li Tel: 13220196153 010-56180445 |
Admin>>>
You are the 15485 visitor
Copyright © GuangDong ICP No. 10089450, Beijing sea level around the building company All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 15485 visitor
Copyright © GuangDong ICP No. 10089450, Beijing sea level around the building company All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility