Road traffic marking zoned mainly located in the road surface, withstand sun and rain, snow, ice, wear a hit vehicle, thus its performance, there are strict requirements. First requires drying time is short, simple operation, in order to reduce traffic disturbances; second, require highly reflective ability, bright, reflective of the strong, so that during the day, have a good visibility at night; and third, should have skid resistance and abrasion resistance, in order to ensure traffic safety and service life. She crossed the road, crossed the road factory, the factory parking lot, underground garage crossed, school crossed the road, living quarters and other construction projects crossed, crossed into two crossed cold and hot melt paint. Using special road for cold paint, artificial coating, thickness, color and clarity. Parking included, Jinting yellow line area, the channel line, the diversion with the guide arrows. First, cold painted dash, the use of special road for cold paint, artificial spray, thickness, color and clarity. Parking included, Jinting yellow line area, the channel line, the diversion with the guide arrows. Second, the hot melt marking 1, reflective hot melt marking, paint glass beads, petroleum resin hot melt coating. 2, the paint on the inside hot melt machine heated, melted temperature control between 180 degrees to 220 degrees Celsius, and stir for about 10 minutes after coating. 3, mark the position and measure, according to the position and graphic design icon Ming, and then figure mark applied primer paint. 4, hot melt coating can be carried out after the primer dry, while marking coated reflective glass beads spreading, increase visibility even at night. Contact: Guo Jingli Tel: 15311914602 010-56180445